Description

Introduction

Clear, dependable headlights are essential for safe night driving on Pakistan’s roads, and the Danso H4 Halogen Bulb 12V 100/90W is built to deliver exactly that. As a dual-filament H4 lamp, it powers both the high beam and low beam from a single bulb, making it one of the most widely used headlight formats in cars, motorcycles, and light commercial vehicles. Packaged in Danso’s clearly labeled retail box, this bulb is a practical, ready-to-fit replacement for worn-out or dimming factory headlights.

Features

The H4 format is defined by its dual-filament design: one filament handles the low beam for everyday driving, while the second filament activates the high beam for extra reach on open roads. Danso’s H4 bulb uses a halogen-filled glass capsule, a technology that keeps the tungsten filament burning brighter and more evenly over time compared to standard incandescent bulbs. The bulb’s three-pin base is a globally standardized fitting, allowing it to slot directly into most H4 headlight housings without any wiring changes.

Benefits

The immediate benefit for drivers is improved visibility — the 100/90W output pushes more light onto the road for both beam settings than a lower-wattage bulb would. Because H4 is such a common headlight fitment, this bulb suits a large range of vehicles, making it a handy stock item for spare-parts shops, workshops, and everyday car owners. Its plug-and-play three-pin connector also means replacement can usually be done without a mechanic.

Specifications Table

Compatibility

This is a universal H4 fitment bulb, suitable for any vehicle or motorcycle headlight housing built around a standard H4 three-pin base — a format used widely across sedans, hatchbacks, SUVs, vans, and motorcycles in Pakistan. Before ordering, confirm your current headlight bulb is marked “H4,” since other headlight types (H1, H7, H11, etc.) use different bases and are not interchangeable.

Installation Guide

1. Switch off the engine and headlights, and let the old bulb cool fully before handling it.
2. Open the rear access panel/dust cover behind the headlight housing.
3. Disconnect the wiring plug and unclip the retaining ring or spring clip holding the old H4 bulb in place.
4. Insert the new Danso H4 bulb, matching the base tabs to the housing slots, and avoid touching the glass with bare fingers.
5. Secure the retaining clip, reconnect the wiring plug, refit the dust cover, and test both high and low beams before closing up.

Package Includes

• 1 x Danso H4 Halogen Bulb, 12V 100/90W
• Original Danso retail box

Care Instructions

Handle the bulb by its base rather than the glass, since skin oils can create hot spots that shorten bulb life; if the glass is touched, wipe it clean with isopropyl alcohol before fitting. Store in a dry place and make sure the headlight housing seal is properly closed after installation to keep moisture out.

Warranty

Specification could not be officially verified. Please confirm warranty terms with the seller or retailer at the time of purchase.

Why Buy This Product

The Danso H4 12V 100/90W bulb offers a straightforward, affordable way to refresh dimming headlights with a widely compatible, dual-beam halogen lamp. Its standard H4 fitment, simple plug-and-play design, and clear Danso retail packaging make it an easy pick for everyday headlight maintenance across Pakistan.

4. Product Highlights

• Danso-branded H4 dual-filament halogen bulb
• 12V, 100/90W high & low beam output
• Universal H4 fitment for cars & motorcycles
• Standard P43t three-pin base
• Halogen-filled capsule for consistent brightness
• Simple plug-and-play installation
• Suits sedans, SUVs, vans & bikes
• Improves night-time visibility on the road
• Budget-friendly headlight upgrade option
• Comes in original Danso retail packaging

5. Key Features

• Danso H4 halogen bulb for 12V headlight systems
• 100/90W dual-beam output for high & low beam
• Halogen-filled glass capsule for even, bright light
• Standard H4 P43t base fits most headlight housings
• Easy 3-pin plug-and-play wiring connection
• Wide vehicle compatibility across cars, SUVs & bikes
• Reliable headlight upgrade for night driving in Pakistan
• Compact, durable bulb construction
• Straightforward DIY headlight bulb replacement
• Recognizable Danso retail box for easy identification

6. Technical Specifications

7. Package Includes

• 1 x Danso H4 12V 100/90W Halogen Bulb
• Danso branded box