Eurolite H4 Halogen Bulb 12V 100/90W – P43T Headlight Bulb

Original price was: ₨500.Current price is: ₨400.

Eurolite H4 12V 100/90W halogen bulb — powerful Hi/Lo headlight bulb, easy fitment for brighter night driving in Pakistan.

Quantity
Wishlist

Genuine Product

Fast Delivery

COD Available

Secure Payment

Description

Introduction

For drivers who want extra brightness on the road, the Eurolite H4 Halogen Bulb 12V 100/90W is a higher-output headlight lamp built on the same universal H4 format used across millions of vehicles. As a dual-filament bulb, it powers both the low beam and high beam from a single lamp, and with 100/90W output it pushes noticeably more light than a standard 60/55W bulb. Sold in Eurolite’s “Premium Quality Lighting” retail box marked P43T, this bulb is a straightforward upgrade for dim, aging, or underpowered factory headlights across Pakistan.

Features

The H4 design combines two filaments in a single bulb: one filament runs the low beam for everyday driving, and the second activates the high beam for extended reach on darker roads. The bulb’s higher 100/90W wattage draws more current through the halogen-filled glass capsule, producing a noticeably brighter and whiter beam than lower-wattage H4 bulbs. The P43T three-pin base is a globally standardized fitting, allowing it to slot directly into most H4 headlight housings without any rewiring.

Benefits

The practical benefit of the 100/90W rating is stronger, more far-reaching illumination — useful for highway driving, poorly lit roads, and Pakistan’s foggy winter mornings where extra brightness improves reaction time. Because H4 is such a common headlight fitment, this Eurolite bulb suits a wide range of vehicles, making it a handy stock item for spare-parts shops and workshops. The plug-and-play three-pin connector also keeps DIY replacement quick and simple.

Specifications Table

SpecificationDetail
BrandEurolite
Bulb TypeH4
Voltage12V
Wattage100/90W (High/Low beam)
Base TypeP43T (standard H4 three-pin base)
Glass TypeHalogen-filled glass capsule
Beam TypeDual filament (Hi/Lo)
Typical UseHeadlights (high & low beam), higher-output upgrade
Approval StatusSpecification could not be officially verified
Rated LifespanSpecification could not be officially verified
Lumen OutputSpecification could not be officially verified

Compatibility

This is a universal H4 fitment bulb, suitable for any vehicle or motorcycle headlight housing built around a standard H4/P43T base — a format used widely across sedans, hatchbacks, SUVs, vans, and motorcycles in Pakistan. Note that higher-wattage bulbs like this 100/90W option draw more current, so check that your vehicle’s wiring and headlight housing can safely handle the extra load before switching from a standard 60/55W bulb. Confirm your existing bulb is marked “H4” before ordering, since other headlight types (H1, H7, H11, etc.) use different bases and are not interchangeable.

Installation Guide

  1. Switch off the engine and headlights, and let the old bulb cool fully before handling it.
  2. Open the rear access panel/dust cover behind the headlight housing.
  3. Disconnect the wiring plug and unclip the retaining ring or spring clip holding the old H4 bulb in place.
  4. Insert the new Eurolite H4 bulb, matching the base tabs to the housing slots, and avoid touching the glass with bare fingers.
  5. Secure the retaining clip, reconnect the wiring plug, refit the dust cover, and test both high and low beams before closing up.

Package Includes

  • 1 x Eurolite H4 Halogen Bulb, 12V 100/90W
  • Original Eurolite retail box

Care Instructions

Handle the bulb by its base rather than the glass, since skin oils can create hot spots that shorten bulb life; if the glass is touched, wipe it clean with isopropyl alcohol before fitting. Store in a dry place and make sure the headlight housing seal is properly closed after installation to keep moisture out.

Warranty

Specification could not be officially verified. Please confirm warranty terms with the seller or retailer at the time of purchase.

Why Buy This Product

The Eurolite H4 12V 100/90W bulb is a solid choice for drivers who want more headlight brightness than a standard bulb offers, without moving to a full LED or HID conversion. Its standard H4/P43T fitment, easy plug-and-play design, and clear Eurolite retail packaging make it a convenient upgrade for anyone looking to improve visibility on Pakistan’s roads.

4. Product Highlights

  • Eurolite-branded H4 dual-filament halogen bulb
  • 12V, 100/90W high-output beam performance
  • Universal H4 fitment for cars & motorcycles
  • Standard P43T three-pin base
  • Halogen-filled capsule for brighter, whiter light
  • Simple plug-and-play installation
  • Suits sedans, SUVs, vans & bikes
  • Stronger visibility for highway & night driving
  • Practical upgrade over standard-wattage bulbs
  • Comes in original Eurolite retail packaging

5. Key Features

  • Eurolite H4 halogen bulb for 12V headlight systems
  • 100/90W dual-beam output for high & low beam
  • Halogen-filled glass capsule for brighter, whiter light
  • Standard H4 P43T base fits most headlight housings
  • Easy 3-pin plug-and-play wiring connection
  • Wide vehicle compatibility across cars, SUVs & bikes
  • Stronger headlight upgrade for night driving in Pakistan
  • Compact, durable bulb construction
  • Straightforward DIY headlight bulb replacement
  • Recognizable Eurolite retail box for easy identification

6. Technical Specifications

AttributeValue
BrandEurolite
Lamp TypeH4
Voltage12V
Wattage100/90W (Hi/Lo)
BaseP43T, three-pin
GlassHalogen-filled capsule
ApplicationHeadlights (high & low beam)
FitmentUniversal H4 socket

7. Package Includes

  • 1 x Eurolite H4 12V 100/90W Halogen Bulb
  • Eurolite branded box

Reviews

There are no reviews yet.

Be the first to review “Eurolite H4 Halogen Bulb 12V 100/90W – P43T Headlight Bulb”